Got Mold? How To Ensure Accurate Results For Your Home Mold Testing
If your home smells a bit musty, you might have a mold problem on your hands. If you don't see any active mold growth, you might think you're out of the woods. But, that's not the case. You might not see mold, but that doesn't mean you don't have a problem. Mold tends to grow in out-of-the-way places. Some of those places include under the sinks, and behind the walls. If you suspect you have a mold problem, you need to schedule mold testing. Once you have the testing scheduled, take steps to prepare for your appointment. Your service provider needs the right environment to detect mold spores. If you've never had mold testing before, read the list provided below. Here are four steps that will help you get the most accurate results from your mold test.
Let the Air Build Up the Impurities
If you have an air purifier installed in your home, now's the time to disconnect it. Air purifiers remove mold spores. But, you want the mold testing to identify those spores. The best way to ensure that is to turn the air purifier off for at least a day or two before the mold testing. That gives the spores enough time to build up inside your home. Once the testing is over, you can turn the air purifier on again.
Close the Doors and Windows
If you like to keep your doors and windows open for ventilation, you'll need to make some changes. Like the air purifier, opening the windows can remove the mold spores from your home. Luckily, you don't need to leave the doors and windows closed for too long. On the day of your mold testing, leave the doors and windows closed. That way, your mold testing provider can get accurate mold measurements.
Limit Your Water Usage
If you're scheduled for mold testing, you'll need to limit your water usage. This is especially important on the day of the testing. Mold growth can be caused by plumbing leaks. If you haven't used your plumbing, the service provider can identify mold problems caused by leaky pipes. That's because the moisture will continue to build up in the house.
Steer Clear of the Yard
If you need to have your home tested for mold, try to avoid the yard for several hours. Before the testing, the outdoor air will be tested. That gives your service provider a starting point for your home mold testing. If you've been active in your yard, natural mold spores could be in the air. To avoid that, try to limit your time in the yard for a few hours before your mold testing.
Reach out to a company like Advanced Mold Professionals to learn more.
Share